Autoline » Recambios » Recambios para camper » Cables del acelerador para camperMotoresVentanillas lateralesParabrisas » ZF cables del acelerador para camper » ZF cable del acelerador para MAN ZF MiniCommand 4200 Control Head MicroCommander camper nuevo

ZF cable del acelerador para MAN ZF MiniCommand 4200 Control Head MicroCommander camper nuevo

PDF
Precio:
a consultar
Póngase en contacto con el vendedor
Tipo cable del acelerador
Número de pieza MiniCommand 4200 Control Head
Número del catálogo del original MiniCommand 4200 Control Head, 3341006001 ZF Control Head SmartCommand 5200
Año de fabricación 01/2020
Ubicación Austria Hörsching
Fecha de publicación jun 26, 2020
Id. de stock del vendedor MiniCommand 4200 MicroCommande
PDF
Descripción
Marca del motor MAN
Modelo de motor ZF MiniCommand 4200 Control Head MicroCommander
Motor
Marca MAN ZF MiniCommand 4200 Control Head MicroCommander
Estado
Estado nuevo
Información adicional: Español Árabe Holandés Turco Sueco Serbio Eslovaco Ruso Rumano Portugués Polaco Noruego Lituano Macedonio Búlgaro Italiano Indonesio Húngaro Francés Estonio Inglés Danés Alemán Checo Vietnamita
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
ZF MiniCommand 4200 Control Heads available sale
3341006001 ZF Control Head SmartCommand 5200


The MiniCommand is a ZF propulsion control system in a compact housing, specifically for yachts. The MiniCommand is engineered for control of installations of two engines, with an electronic fuel system and two electrically driven gearboxes. The system is applicable to vessels with both one and two engines and all control levers in our assortment can be connected to it.
4200, 5200,
* cable sets on the preferred lengths with pre-assembled plugs for a user-friendly installation. After installation, the MiniCommand can be fine-tuned using the menu in the display. Among others, the type of throttle signal, the throttle pause following shift, and high idle can be set.

*Additionally, the MiniCommand is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head, a derivative of the popular 5200 series SmartCommand control head.
MiniCommand standard features:

Start interlock
Warm up mode
Cruise mode
Single lever mode
Automatic "open loop" engine synchronization
Compatible with 12 or 24 volt systems
Diesel engines only
Maximum two stations
Single level control of transmission direction and engine speed
Proportional pause on emergency reversal protection
The MiniCommand processor is designed with side mounted plug connectors for quick and easy insallations and neatly organized cable routing

***MiniCommand Part Numbers: MI4002, MI4007, 4200, 4200LP, 4200AF
SmartCommand 5200; MiniCommand 4200;MC2000-2; MC2000-1; 460; 463; 466-4

MiniCommand offers the flexibility to be paired with the same control heads offered for MicroCommand, CruiseCommand, and ClearCommand. In addition the 4200 Series control head was designed specifically for MiniCommand. A derivative of the popular 5200 control head for the SmartCommand control system, the 4200 offers all the ergonomic comfort and modern European design
ZF Marine MiniCommand is compatible with ZF Marine Electronics 400, 500, 700, MC2000, and 4000 series control heads.

ZF Control Head Smart Command Series with Dual Levers at Seatech Marine Products, Inc. Part No. 5200. This model fits Mini-command, Cruise-command, 9000 Series Clear Command and 9000 Series Premium Clear Command control systems. The Mini-command series is designed for pleasure craft and vessels up to 50 feet with a maximum of two control stations. When you purchase from Sea-tech Marine Products, Inc., you have the support of professionals in the marine industry. We believe that providing knowledgeable customer service is an essential part of selling boating supplies.

3341006001 ZF Control Head Smart-command 5200

features of ZF Mathers Control Heads:

Start Interlock– Prevents the engine from starting while the transmission is in gear
Cruise Mode – Allows two engine systems to be operated with a single lever control of clutch and throttle with one lever per engine.
Multiple Station Control – Effortlessly maintain the same speed on multiple engines. Engine synchronization improves fuel economy and reduces both noise and vibration.
Warm Up Mode – Allows the operator to rain the engine to the proper operating temperature for quicker departures.
Warm up mode is also useful for engine testing.
to exchange a MC2000-4 for a 4200 model, - Actually the 4200 model has plugs for connecting the cable where the MC2000-4 has a terminal trip at the bottom side of the control head.
Consejos de compra
Importante
Esta oferta es de carácter informativo. Para obtener más detalles, póngase en contacto con el vendedor.
Consejos de seguridad